Dayton, Ohio, has low humidity levels of around 45% and often experiences plumbing issues in freezing weather. In such conditions, a flooded basement could be one of the worst home emergencies to have to deal with. The water will cause damage to furniture, appliances, drywall, flooring, and anything else in your basement. That’s why you need your sump pump working at all times.
Your sump pump protects your house from flooding by moving excess water away from the foundation. But, sump pump issues may come up at any time, and they must be addressed immediately.
Here are a few ways to identify sump pump issues:
1. You Hear Strange Noises
A sump pump is pretty noisy, but it shouldn’t sound like there’s a bowling alley downstairs. If your basement floods repeatedly and you think the pump needs to be replaced, ask someone to go down into the basement with you. Watch the sump pump, and turn off the power if it seems to be making odd noises.
Usually, two pumps push the water out of the drainage system through a pipe, and another pumps the water out of the basin. If you hear irregular or odd noises, there might be something wrong with the pump.
2. Your Basement Is Flooding Again
If you notice your basement flooding and it’s the same issue repeatedly, you might have sump pump issues. If the water level is above the pump or there’s debris in front of it, that can cause problems.
It needs time to work effectively, so don’t crowd around it, blocking its path. Also, avoid using harsh chemicals to clean the basement near the pump.
Sometimes, it happens if your wiring is faulty or the pump is getting old. You also need to check the basin for clogs or debris that may have gotten into the system during a storm.
3. Water Is Pooling Around The Basin
If there’s water on the floor of your basement, you need to find out where it’s coming from. First, you should see if your pump isn’t working or there’s a clog. If you find that the pump isn’t to blame, then the water is most likely coming from outside your house.
It could even be due to groundwater seeping up through cracks in the foundation, which can occur if it isn’t installed correctly. You also have to consider any downspouts that are too close to the house. Make sure they’re draining water away from your foundation instead of toward it.
Or there may be a leak in the plumbing system, which is usually noticeable by dampness near pipes or leaks coming through cabinets or cracks in the doors. Depending on where you notice the problem, sump pump repair or replacement could fix it.
4. You Don’t See Water Running Out of the Drain
If you don’t see water running out of the sump pump, make sure it’s turned on and check the power source. Sometimes, sump pumps malfunction when there’s a power outage or if they’re not plugged into a wall socket correctly. If that’s not what’s causing it, try the above tips to see if you can find a resolution.
5. You Hear A Slurping Sound
If you hear water sucking up through your sump pump, it needs to be replaced. The simple explanation is that the impeller isn’t screwed in correctly.
Sometimes, water can enter the pump or motor housing, which leads to corrosion and rust that makes the pump too heavy to function correctly. When that happens, you will have to replace the pump as soon as possible.
6. The Basin Or Drain Is Clogged
A clogged basin can cause water to flood your basement. The sump pump cannot get the water out of the system if it’s blocked in any way, and you’ll see standing water in your cellar.
To prevent this from happening, use a wire to remove debris and avoid letting food sink into the basin since that can attract mice and other pests.
7. Smells or Water Leaks Inside Your Basement
If there are water leaks inside your basement, the cause could be sewage backup or faulty plumbing. If you find standing sewage in your cellar or notice that it smells like sewage, call a plumber immediately to examine and fix the problem before it gets worse.
If your basement smells, it’s probably time to call a plumber. Standing sewage or smelly water in the sump pump system can trigger smells. It could be coming from the drains, which are usually connected to the plumbing waste line that leads to the sewer. If the water level in your system is too high, you need to remember that it’s not designed for freshwater use.
When in doubt, call professional services for help with your sump pump issues, be it repairs or replacement. You want to avoid flooding and expensive repairs by taking care of the problem before it escalates.